No Programming
    Plug & Play
    Comes with LNS

The All-In-One Solution for LoRaWAN

The Datacake LoRaWAN Gateway comes with cellular connectivity, Datacake IoT platform, and eliminates the need for complicated and time-consuming programming.
Simply place the Gateway where you want it, connect it, and get started!


Starting with LoRaWAN could not be easier.

    No LoRaWAN Network Server required
    No Programming and Configuration required
    No Internet Connection required
    No additional Software required

❌ Without a Datacake Gateway:

Everything is manual and time-consuming. You buy a LoRaWAN Gateway and need to configure it. It may not have cellular connectivity and must be connected to the Internet via Ethernet or WiFi. Next, you need a LoRaWAN network server like TTN or Loriot. You have to configure this server, register and connect your Gateway to it, and create applications on it for your devices. But you still cannot see any measurement data. Now you have to connect the LoRaWAN network server to an IoT platform. Until you can start using LoRaWAN, it will take a few hours. And that again and again.

✅ With Datacake Gateway:

You don't have to worry about anything. The gateway comes with cellular and SIM card, so it runs out of the box. It is directly connected to a LoRaWAN network server and corresponding applications and dashboards for many LoRa devices are immediately available. From Sensor to IoT dashboard on web or app takes only a few minutes.

Ready in 10 Minutes

Setting up the Datacake LoRaWAN Gateway really is that simple. It just requires three easy steps.



Place Gateway and Switch Power On

Simply Place the Datacake LoRaWAN Gateway and power it up using the power supply. Thanks to cellular LTE connection the Gateway will connect to the Internet and cloud without an Internet connection required.



Register Sensors on Datacake Cloud

On the Datacake platform, you can register your LoRaWAN Devices by entering DevEUI, AppKey. Thanks to integrated LoRaWAN Network Server no additional configuration is required.



See Live Values on Dashboard and Smartphone

Datacake features Templates for common LoRaWAN Devices. If you register a device using such a template a Dashboard will be created and you see live data from your devices within seconds on both Web- and Smartphone-Application.

You already have a LoRaWAN Gateway?

Did you know that the Datacake Platform can be used with almost all LoRaWAN Gateways and Products?

Works with so many products.

Datacake features Ready-to-Use Templates for LoRaWAN Products and Sensors. See here for a List of Devices that are having a Template.

Your Product is not in the list?

Don't worry. You can still use the gateway and bring your device online by providing a payload decoder directly on Datacake or by asking us to integrate an integration for your desired device. We do this free of charge and would be happy to know which device you are looking for.


It makes life easier for developers.

The Datacake IoT platform significantly simplifies the development process for LoRaWAN products.

    Comes with LoRaWAN Network Server
    Write Payload Decoders on Datacake
    Test IoT Applications on Datacake
    Smartphone App included

Does not require an Internet connection

Once the gateway is powered, it automatically connects to the Internet and the Datacake platform using on-board LTE modem and SIM-Card.

    Cellular LTE Connectivity
    Comes with Prepaid SIM-Card

The Versions

The individual versions do not differ in functionality, but all of them come with a prepaid package for the Datacake platform. This saves compared to the single device pricing and does not require any further monthly payments for the first year.


399,- €(excl. VAT)

The Datacake LoRaWAN Gateway with Connectivity using WiFi or Ethernet Networks.

500+ Meters LoRaWAN CoverageWiFi + Ethernet required


599,- €(excl. VAT)

Plug and Play Version of the Datacake LoRaWAN Gateway with 4G/LTE Cellular Modem + SIM Card.

500+ Meters LoRaWAN CoverageCellular LTE ConnectivitySIM Card Included1 Year prepaid SIM Fees*

*Comes with 1 Year Cellular Fee

With the Cellular LTE Version, the Gateway comes a free 1 Year subscription for the SIM.

What happens after 1 Year?Recharging your SIM Card for the next Year starts at 20€ - depending on how many sensors you have.


  • Do I need to set up a LoRaWAN Network Server?

    No. That's one of the benefits that you get from using the Datacake LoRaWAN Gateway. Additional, external LoRaWAN Network Servers are not required in order to have the Gateway running. We also take care of the LNS we use in the Background so that you always can rely on the Gateway to be fully functional.

  • Can I use the Gateway with third-party LoRaWAN Servers like TTN, Loriot?

    No. As the Gateway comes with it's own cloud-based LNS you cannot connect third-party LNS like TTN or Loriot. However. If you are looking for a way to connect a third-party LNS to Datacake - this is absolutely possible. We offer a native integration for almost all LNS. Read more about this.

  • I don't need cellular. Can I use WiFi or Ethernet instead?

    Yes. There is the option to use an ethernet port on the Gateway as an alternative to cellular. 

  • I already have a LoRaWAN Gateway!

    Perfect. The Datacake Platform can be used with any LoRaWAN Gateway. There is no need of using the Datacake LoRaWAN Gateway then. See here for more details on this.

Have more questions?

Leave us a Message and we are getting back to you as fast as we can.

Not sure how the Gateway will help you?

No worries. We are happy to show you how the Datacake LoRaWAN Gateway can help you get started with LoRaWAN in a Live-Demo where we will also be able to answer all your questions.

Book a free Demonstration

Thank you!

We will contact you shortly.

Can't send form.

Please try again later.

By requesting a free Demo I Agree to the Privacy Policy and I am OK with receiving E-Mails about Demo Instructions.